Skip to content

Anderson 120A Power Connector

SKU PT4422
Original price $27.95 - Original price $27.95
Original price
$27.95
$27.95 - $27.95
Current price $27.95
Used widely in both domestic and industry, you'll find this connector in many 4WD applications, boating, automotive and other industries. Supplied individually with a pair of contacts.

Contact Wire Size: 33.6mm2 (2 AWG)
Max Wire Insulation Diameter: 14.6mm
Contact Retention Force: 45.5kg (100lbs)
Operating Temperature: -20 to +125 degrees C

Handy Tip Assembling Anderson Style Connectors

These connectors come with absolutely no assembly instructions which might surprise some. Assembly is self evident however. All that you really have to do is solder-sweat the heavy gauge wire into the 'pot' on the end of the connector tip. It is a good idea to puddle some solder into the pot and then lower the tinned wire into the pot. It may be necessary to apply some more heat (usually with a small gas torch or stove gas top)to get the whole lot to melt. Try to keep the joint immobile until the solder 'sets', then cool off under tap water. And of course you can always crimp the lead into the solder cup, but this should really be done professionally. A piece of heat shrink tidies the job nicely. The wire/lug/contact then just snaps into the housing.

DC Current Rating


DC current rating
120A

DC Voltage Rating


DC Voltage
600V

Plug or Socket


Pack Quantity
1pc
Device
Plug
Plug or Socket Type
Anderson 120A 2 Pole
Contacts / Pins
2pc
Attachment Method
Crimp
Case Material
Plastic

Operating Temperature and Humidity


Operating Temperature
125°C

Packaged Dimensions


Packaged Volume
0.167214l
Packaged Weight
0.078kg
Packaged Length
5.8cm
Packaged Width
9.3cm
Packaged Height
3.1cm

Product Availability


Availability
Stocked item

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare