12V 1A SLA Battery Charger
A mains powered Lead Acid battery charger designed for 12V batteries. Features intelligent automatic charge controller to stop charging when the battery is full and maintain the battery with a ‘floating’ charge mode. This feature allows you to leave the charger connected to the battery without risk of overcharging and know your battery is always ready to go. Includes a 2m long cable with interchangeable DC plug and Alligator clips.
Features:
- Float output voltage: 13.6V
- Bulk charge mode voltage: 14.4V
- Suitable for: Jet Skis, small Motorbikes and some kids ride-on toys.
- Reverse polarity protection.
NOTE: These chargers are not recommended for long-term "maintenance" charging of unsealed lead-acid batteries, the types with removable filler caps and liquid elctrolyte. Long-term continuous float charging of this type of battery may cause loss of water from the electrolyte, ruining the battery. If you are intending to use this charger on these batteries please use an appliance timer such as MS6113 to automatically limit the charging to 30 minutes or so per day.
For More info on Charging Batteries.
Low current output designed to steadily recharge sealed lead acid(SLA) batteries without causing the battery to overheat and become a swollen mess. As a guideline the charger’s current rating shouldbe no more than 10 to 15% of the battery’s ampere-hour rating.
Product Dimensions
Cable length | 2m |
Depth | 40mm |
Length | 70mm |
Width | 40mm |
Battery Charger
Type of Batteries | Sealed Lead Acid (SLA), Deep Cycle SLA, Deep Cycle Gel Cell, Lead Acid |
Connection Type | Alligator Clips |
Controller Type | Multi-Stage |
Charger Output Voltage | 12V |
Charger Output Current | 1A |
Mains powered
Mains Voltage Range | 100V, 240V |
Frequency | 50Hz |
Mains Item connection | Mains AU/NZ 3 Pin |
Packaged Dimensions
Packaged Volume | 0.37936l |
Packaged Weight | 0.156kg |
Packaged Length | 9.8cm |
Packaged Width | 7.9cm |
Packaged Height | 4.9cm |
Product Availability
Availability | Stocked item |