Products

This module accepts any voltage from 4.5-35VDC, and outputs to any lower voltage from 3-34V. Output is adjusted via a multi-turn potentiometer.Feat...

The Arduino compatible boost module can be used to provide higher voltages for your project, such as running 5V Arduino projects from Lithium batte...

The DS18B20 Digital Temperature Module provides up to 12bits of resolution and 0.5 degree accuracy through a single digital IO pin with no external...

The popular HC-SR04 ultrasonic distance module provides an easy way for your Arduino™ to measure distances up to 4.5m. Use it to add obstacle avoid...

Using the powerful ESP8266 IC, the ESP-13 Wifi Shield adds much more than just plain wifi to your Arduino. It has an 80MHz processor and can also a...

This module has an on-board ceramic antenna meaning you don’t need an external one, however, an SMA connector is also attached if you wish to atta...

The HD44780 compatible LCDs are great for displaying text and simple graphics, but quickly use up your available microcontroller pins. Using the P...

The Arduino Compatible Long Range LoRa shield turns your Arduino into a LoRa node capable of transmitting and receiving data over long distance, ev...

The keyestudio microphone sensor is typically used in detecting the loudness in ambient environment. The Arduino can collect its output signal by a...

Ideal for DIY projects including Arduino®. Features 10 rows of 17 holes for convenient prototyping. Can be mounted permanently via two screw mounts...

This audio module can play MP3 files from installed microSD (sold separately). A built-in amplifier can power an 8-ohm speaker, and a 3.5mm audio s...

A full featured MP3 module that supports both playback and recording. An onboard microphone is used for audio in, and a 3.5mm jack provides the out...

Otto is an interactive robot that anyone can make! It is completely open source, Arduino compatible and 3D printable.Otto is able to walk, dance, m...

This is a full-color LED module, which contains 3 basic colors?red, green and blue. They can be seen as separate LED lights.After programming, you ...

Rotary encoders are classified into two types: absolute and incremental. The absolute encoder reports the exact position of the knob in degrees, wh...

This tiny module allows you to connect a legacy device (or computer) to your existing Arduino board. Providing a full RS-232 port, this shield all...

Features 5V and 3.3V power inputs and resistors to safely accept either IO pin's voltage output.  Features: Push-pull style SD card cocket Works w...

With back-EMF and over-temperature protection, it is ideally suited to drive two-motor robot kits. An on-board 5V regulator can also be used to pow...

Measure both temperature and humidity with this nifty module. Fully digital operated so no analogue-to-digital calibration is required. Features re...

This sensor module works like an adjustable resistor that changes based on pressure on the centre pad. It converts pressure signal from the sensor ...

Use this high performance acceleration sensor module in your project to detect direction (transverse/longitudinal), as well as free fall, pulse, a...

A prototyping shield to suit the XC3802 Wi-Fi Mini main development board. Create custom hardware and add features to your project or build custom...

Add dazzling circular-shaped LED patterns to your next project or costume with this addressable RGB LED ring module. It measures 72mm in diameter a...

The board is interfaced through 5 pin header and provides a small game-pad style joystick. There is also a tactile switch when you push the stick d...